latex_hotreload: new

autoxsetwacom/autoxsetwacom.sh

@@ -4,6 +4,6 @@
 
 device_id="$(xsetwacom list devices | grep STYLUS | cut -f2 | cut -d' ' -f2)"
 
-xsetwacom set "$device_id" MapToOutput 1920x1080+0+0
+xsetwacom set "$device_id" MapToOutput 1920x1200+0+0
 xsetwacom set "$device_id" Area 0 0 15200 8550
 

bin/display-config

@@ -0,0 +1 @@
+../display-config/display-config.sh

bin/display-restore

@@ -0,0 +1 @@
+../display-restore/display-restore.sh

bin/latex_hotreload

@@ -0,0 +1 @@
+../latex_hotreload/latex_hotreload.sh

bin/screen-saver

@@ -0,0 +1 @@
+../screen-saver/screen-saver.sh

check_battery/check_battery.sh

@@ -6,6 +6,10 @@ time="$(upower -i $DEVICE | grep time | cut -d':' -f2 | tr -s ' ' | cut -c2-)"
 perc="$(upower -i $DEVICE | grep percentage | awk '{print $2}' | tr -d '%')"
 stat="$(upower -i $DEVICE | grep state | awk '{print $2}')"
 
+if [ "$stat" = "charging" ]; then
+	exit 0
+fi
+
 if [ "$perc" -le "20" ]; then
     urgency="normal"
     if [ "$perc" -le "10" ]; then

display-config/README.md

@@ -0,0 +1,7 @@
+# display-config
+
+## About
+-- about section here --
+
+## Requirements
+-- any requirements --

display-config/display-config.sh

@@ -0,0 +1,128 @@
+#!/bin/sh
+
+if [ "$(command -v rofi)" ]; then
+    CMD='rofi -dmenu -i';
+elif [ "$(command -v dmenu)" ]; then
+    CMD='dmenu';
+else
+    echo 'Could not find either dmenu or rofi, exiting'
+    exit 1;
+fi
+
+# $1 - monitor name
+#
+# return "WIDTH1xHEIGTH1\nWIDTH2xHEIGTH2\n..."
+get_monitor_sizes() {
+	xrandr | awk -v monitor="$1" \
+		'$1 == monitor { display=1; next } /^[A-Z]/ { display=0 } display { print $1 }'
+}
+
+# $1 - monitor name
+#
+# return xrandr "--mode WIDTHxHEIGTH" or "--preferred"
+monitor_config() {
+	sizes="$(get_monitor_sizes "$1")"
+	if [ "$1" = "eDP-1" ]; then
+		DISPLAY_CONFIGS="Preferred\n$sizes"
+	else
+		DISPLAY_CONFIGS="$sizes"
+	fi
+
+	CONFIG="$(echo "$DISPLAY_CONFIGS" | $CMD -p "Monitor $1 config" | xargs)"
+
+	case "$CONFIG" in
+		Preferred)
+			echo "--preferred"
+			return
+			;;
+		"")
+			exit 1
+			;;
+		*)
+			echo "--mode $CONFIG"
+			return
+			;;
+	esac
+}
+
+# return "eDP-1\nHDMI-1\n..."
+get_monitors() {
+	xrandr | awk '$2 == "connected" {print $1}'
+}
+
+monitors="$(get_monitors)"
+n_monitors="$(echo "$monitors" | wc -l)"
+
+if [ "$n_monitors" -eq "1" ]; then
+	config="$(monitor_config "$monitors")" || exit 1
+	# shellcheck disable=SC2086
+	xrandr --output "$monitors" $config
+elif [ "$n_monitors" -eq "2" ]; then
+	DISPLAY_ARRANGEMENTS="Join\nMirror\nOnly"
+	N_ARRANGEMENTS="$(echo $DISPLAY_ARRANGEMENTS | wc -l)"
+	ARRANGEMENT="$(echo "$DISPLAY_ARRANGEMENTS" | $CMD -l "$N_ARRANGEMENTS" -p "Display arrangement" | xargs)"
+
+	case "$ARRANGEMENT" in
+		Join)
+			args=""
+
+			prev_monitor=""
+			for monitor in $(get_monitors); do
+				position=""
+				if [ "$prev_monitor" != "" ]; then
+					POSITIONS="right-of\nleft-of\nabove\nbelow"
+					N_POSITIONS=4
+					position_flag="$(echo "$POSITIONS" | $CMD -l "$N_POSITIONS" -p "Select position" | xargs)"
+					if [ "$position_flag" = "" ]; then exit 1; fi
+
+					position="--$position_flag $prev_monitor"
+				fi
+				config="$(monitor_config "$monitor")" || exit 1
+				args="$args --output $monitor $config $position"
+				prev_monitor="$monitor"
+			done
+			# shellcheck disable=SC2086
+			xrandr $args
+			;;
+		Mirror)
+			args=""
+
+			prev_monitor=""
+			for monitor in $(get_monitors); do
+				config="$(monitor_config "$monitor")" || exit 1
+				args="$args --output $monitor $config"
+				if [ "$prev_monitor" != "" ]; then
+					args="$args --same-as $prev_monitor"
+				fi
+				prev_monitor="$monitor"
+			done
+			# shellcheck disable=SC2086
+			xrandr $args
+			;;
+		Only)
+			monitors="$(get_monitors)"
+			n_monitors="$(echo "$monitors" | wc -l)"
+			monitor="$(echo "$monitors" | $CMD -l "$n_monitors" -p "Select monitor" | xargs)"
+			if [ "$monitor" = "" ]; then exit 1; fi
+			config="$(monitor_config "$monitor")" || exit 1
+
+			args=""
+			for monitor_i in $monitors; do
+				if [ "$monitor_i" = "$monitor" ]; then
+					args="$args --output $monitor_i $config"
+				else
+					args="$args --output $monitor_i --off"
+				fi
+			done
+			# I do want word splitting for argument config
+			# shellcheck disable=SC2086
+			xrandr $args
+			;;
+		*)
+			exit 0
+			;;
+	esac
+else
+	arandr
+fi
+

display-restore/README.md

@@ -0,0 +1,7 @@
+# display-restore
+
+## About
+-- about section here --
+
+## Requirements
+-- any requirements --

display-restore/display-restore.sh

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+restore() {
+	n_active_displays="$(xrandr | awk '/ connected/ && /[0-9]+x[0-9]+\+[0-9]+\+[0-9]+/ { print $1 }' | wc -l)"
+	
+	if [ "$n_active_displays" -ge "1" ]; then
+		return 0
+	fi
+	
+	monitor="$(xrandr | awk '$2 == "connected" {print $1; exit}')"
+	
+	xrandr --output "$monitor" --preferred
+}
+
+if [ "$1" = "loop" ]; then
+	while true
+	do
+		restore
+		sleep 5
+	done
+else
+	restore
+fi

latex_hotreload/README.md

@@ -0,0 +1,7 @@
+# latex_hotreload
+
+## About
+-- about section here --
+
+## Requirements
+-- any requirements --

latex_hotreload/latex_hotreload.sh

@@ -0,0 +1,51 @@
+#!/bin/bash
+
+entry="$1"
+files_to_watch=$()
+
+if [ -z "$entry" ]; then
+	echo "Error: no entry provided. See --help for usage"
+	exit 1
+fi
+
+if [ "$entry" == "--help" ]; then
+	echo "Usage: latex_hotreload [OPTIONS] entry_tex_file"
+	echo ""
+	echo "	OPTIONS:"
+	echo "		--help:	show this help"
+	echo ""
+	echo "	STDIN:"
+	echo "		The stdin should contain the files that should be watched for recompilation"
+	echo "			Defaults to ./*.tex"
+	echo ""
+	echo "	ARGUMENTS:"
+	echo "		entry_tex_file:	the entry latex file for compilation"
+	echo ""
+	exit 0
+fi
+
+output="$(echo "$entry" | sed 's/\.tex$/.pdf/')"
+
+if test ! -t 0; then
+	while IFS= read -r line
+	do
+		files_to_watch+=("$line")
+	done
+	
+	files=$(printf "%s" "${files_to_watch[*]}")
+	files="$(echo $files | sed 's/ /\n/')"
+else
+	files="$(find . -type f | grep "\.tex")"
+fi
+
+echo $files | sed 's/ /\n/g' | entr -s "pdflatex -shell-escape $entry" &
+entr_pid=$!
+
+while [ ! -f "$output" ]
+do
+  sleep 0.5
+done
+
+zathura "$output"
+
+kill -s 2 "$entr_pid"

restart-touchpad/restart-touchpad.sh

@@ -3,6 +3,7 @@
 id="$(xinput list | grep Touchpad | cut -f 2 | sed 's/id=//')"
 
 xinput disable "$id"
+sleep 1
 xinput enable "$id"
 
 # $1 prop name
@@ -22,3 +23,7 @@ xinput set-prop "$id" "$prop" 1, 1, 1, 2, 1, 3
 # Enable Horizontal and Vertical Two-Finger scrolling
 prop="$(get_prop 'Synaptics Two-Finger Scrolling')"
 xinput set-prop "$id" "$prop" 1, 1
+
+if [ "$1" = "--notify" ]; then
+	notify-send -u "low" --icon="input-touchpad" "Restarting touchpad"
+fi

screen-saver/README.md

@@ -0,0 +1,7 @@
+# screen-saver
+
+## About
+-- about section here --
+
+## Requirements
+-- any requirements --

screen-saver/screen-saver.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+id="$(xprop | grep WM_CLIENT_LEADER | cut -d' ' -f5)"
+xdg-screensaver suspend "$id"